Posters

Poster Group A

play all

• 1. Error analysis of stages involved in CBCT-guided implant placement with surgical guides when different printing technologies are used (Brandon Yeager DMD MS, Gulce Cakmak DDS PhD, Fengyun Zheng DDS, PhD, FACP, William Michael Johnston PhD, Burak Yilmaz DDS PhD)
• 2. Accuracy of 3D-printed complete arch implant analog models (Andréa Gagnon-Audet, DMD, MSD; Manuel Bratos, DDS, MSD, CDT; Unnur Flemming Jensen DDS, MSD; John A. Sorensen, DMD, PhD.)
• 3. The effect of silver diamine fluoride on the surface roughness of dental ceramics (Tintu Chandy BDS, DDS, MS; Carl Driscoll DMD; Radi Masri DDS, MS, PhD)
• 4. A digital workflow to provisionlize a tooth-supported arch at an opened occlusal vertical dimension. (Omar Mohamed, BDS; Ramtin Sadid-Zadeh, DDS,MS)
• 5. Computer-Assisted Implant Planning and Full-Arch Immediate Loading with a Complete Digital Workflow (Kedith Sawangsri, DDS; Akber Ali, DMD, MD; Ramtin Sadid-Zadeh, DDS,MS; Ahmet Orgev, BDS,MS,MSD)
• 6. Functional and aesthetic parameters transfer to a virtual articulator, a digital facebow (Nataly Rabelo Mina Zambrana, DDS, MSc, PhD candidate Sergio Yasuda, DDS Ana Carolina Caiado, DDS, MSc, PhD Euripedes Vedovato, DDS, MSc Eduardo Miyashita, DDS, MSc, PhD Newton Sesma, DDS, MSc, PhD)
• 7. Precision attachments to the rescue in bone graft failure cases -Workflow and learnings. (Dr Karan Handa, Dr Igor Pesun)
• 8. Achieving Ideal Implant Emergence Profile and Papillae Creation in the Esthetic Zone (Aikaterini Anastasaki, Bright Chang, Wen-Chou Wu, James Bradley, Hussein Basma)
• 9. Minimally invasive lithium disilicate veneers in a patient with a deep overbite: a case report (Shalom Benzaquen, DMD; Alejandro Sanchez Lara Murguia, DDS; Mariane Bafile, DMD; Konstantinos Chochlidakis, DDS, MS, FACP)
• 10. Digital workflow for fabrication of full arch long-term provisional for growing patients with Ectodermal Dysplasia. Case Report. (Catherine Arreaza, DDS, Damian Lee, DDS, MS, FACP)
• 11. The effect of a new design of supporting structure on marginal and internal gap of additively manufactured interim crowns. (Leila Nasiry Khanlar, DDS, MS, PhD; Claire Francis; Abdul Basir Barmak, MD, MSc, EdD; Alma L. Salazar Rios, DDS, MS; Reza Eftekhar Ashtiani, DDS, MSc; Amirali Zandinejad, DDS, MSc.)
• 12. Retreatment of a Natural Tooth Full Mouth Rehabilitation Utilizing a Completely Digital Workflow (KAROLINA M. MIGUS, DMD, AVINASH S. BIDRA, BDS, MS, FACP, PATCHNEE RUNGRUANGANUNT, DDS, MSD, FACP)
• 13. Jaw in a day: digital planning and reconstruction of mandible with odontogenic myxoma (Stephen Cox, DMD; Dima Ghunaim DDS, MS, FACP; Sandra Al-Tarawneh DDS, MS, FACP; Nicolas Callahan MPH, DMD, MD; Michael Miloro DMD, MD, FACS; Loren Moles DMD)
• 14. Tongue thrusting habit and occlusal instability found after long term use of continuous positive airway pressure therapy for the treatment of obstructive sleep apnea (Victor Moncada, DDS, MS, Sandra Jean O'Neal, DMD, MS, Wen chou Wu, DDS, MS, FACP)
• 15. The efficacy of articaine through local infiltration for fixed prosthodontic procedures. (Ghislain Cohen, DDS)
• 16. Radiation mapping for head and neck cancer patients and dental implant treatment: a literature review (Arwa Almutair, BDS)
• 17. Step by step technique for creating an anterior implant provisional for soft tissue contouring using anodized temporary cylinder (Omar HMS Moustafa, Damian J. Lee)
• 18. Full Mouth Rehabilitation of Severe Class II Malocclusion Utilizing CADCAM Workflow (ByongSoo Timothy Chae DMD, Kristen Frantz DMD, Jeremy Toscano DMD, Carlo Ercoli DDS MBA)
• 19. Fixed implant-supported prosthesis of a postmaxillectomy patient: A digital approach (Lamprini Leotsakou D.D.S; Jorge Palavicini D.D.S, M.S.)
• 20. Healing Time Required Prior to Final Restoration following Crown Lengthening Procedure: A Systematic review (Venkata Sruthi Surabathula, Himanshi Aggarwal, Chin-Chuan Fu)
• 21. Anodizing Technique to Improve Esthetics (Ariana Rodriguez, DDS)
• 22. Fracture Resistance of Endodontically Treated Teeth Restored with Fiber Posts Luted with Composite Core Materials (Abdullah S Alshahrani, Hassan B Alamri, Faisal M Nadrah, Moteb K Almotire, Ahmed Y Alateeq, Ibraheem F Alshiddi, Sayed R Habib , Ala’a Abu-Obaid)
• 23. Case Report: A Digital Approach to Replacing a Preexisting Irreparable Denture (Jeffrey Chen DMD, Damian Lee DDS MS FACP.)
• 24. Stackable guides: Enabling Prosthodontic goals with Guided Implantology – Case Report (Neeraj Surathu, BDS; Niranjan Ratnakar Joshi, BDS, MDS, MS, FACP)
• 25. Digital alignment of two casts without hard tissue reference points: Laboratory Technique (Yamen Safadi, DDS; Himanshi Aggarwal, BDS, MDS; Ruhanijot Cheema, BDS, MDS; Daniel A. Givan, DMD, PhD.)
• 26. Manufacturing technology and sample geometry affect fracture resistance of CAD/CAM-fabricated resin samples (Julian Nold, Christian Wesemann, Beatrice Arnold, Jörg Lüchtenborg, Siegbert Witkowski, Benedikt Christopher Spies)
• 27. Detachable interocclusal record for fixed complete dentures; a clinical report. (Omar Alqabandei, DDS; Ahmad Majeed-Saidan, BDS, MSD, FRCDC; Amelia Orta, DMD, FACP; Radi Masri, DDS, MS, PhD, FACP.)
• 28. Repurposing Dental Implants from an Overdenture for a Maxillary Complete-Arch Fixed Implant-Supported Prosthesis (Gregory Tao, DDS, MS; Avinash S. Bidra, BDS, MS, FACP)
• 29. Influence of implant submersion due to continuous craniofacial growth, to smile attractiveness (Panagiotis Ntovas, Maria Soundia, Ilias Karveleas, Ourania Ladia, Efstratios Papazoglou, Wael Att)
• 30. The accuracy of facebow record: a comparison between conventional facebow and smartphone 3D scanner (Hasan Al Yousuf, DDS; Robert Ault, DDS; Fei Liu, DDS, MS; Tim Joda Dr med dent, MSc, PhD; Junying Li, DDS, MS, PhD)
• 31. Full Mouth Rehabilitation with Fixed Implant-Supported Restoration for a Myasthenia Gravis Patient (Abdusalam Alrmali, Andreas Onisiforou, Christiana Onisiforou, Ibrahim Sherif, Derar Almalhouf.)
• 32. Flexural strength of materials used for provisional restorations (Dr. Taillk Gomes, Dr. Nathaniel Lawson, Dr. Pranit Vasant Bora, Dr.Nadia Machado, Dr. Akram Ahmed)
• 33. Magnet-Retained All-On-X System: Prosthetically Driven Surgery and Provisionalization (Timothy Daudelin, DDS; Samuel Richards, DDS, MS, FACP)
• 34. Workflow For Full-Arch Implant Supported Reconstruction with Limited Inter-Arch Space (Wadiah Almadani, BDS; Niranjan Joshi, BDS, MDS, MS, FACP; Jack Piermatti, DMD, FACP)
• 35. Using thermoplastic denture for immediate fixed dental prosthesis. (Rajat Rathi, BDS; Damian Lee, DDS, MS; Stephen Ginsburg, DDS, MS)
• 36. CAD/CAM implant indexing device for accurate positioning of non-engaging abutment. (Christian Loo, DMD)
• 37. A guided digital approach for prosthetically-driven zygomatic implant therapy: a case presentation (Dalia Waia, DDS; Sandra Al-Tarawneh, DDS, MS, FACP; Howard Jeon, DMD; Rand Harlow, DDS, FACP)
• 38. Full mouth rehabilitation for a systemically compromised patient with mutilated dentition. (Laurentiu Popa, DDS, CDT, Himanshi Agrawal, BDS, MDS, Chin Chuan Fu, DDS, MS, FACP)
• 39. Porcelain fused to metal restorations with extracoronal attachments (Paul Mikhail, Igor Pesun)
• 40. Effect of Scan Technique on the Shade Measurement by an Intraoral Scanner (Eman Al Kaba, BDS; Amal Alfaraj, BDS,MSD,FRCD; Wei-Shao Lin,DDS,PhD,MBAa.)
• 41. Wear of lithium disilicate opposing zirconia, lithium disilicate and porcelain. (Pranit Bora, Krisha Shah, Nate Lawson, Amir Nejat.)
• 42. Is intraoral scanner accurate enough to digitalize complete denture? A comparison with desktop scanner (Nivedita Chinam, BDS,MDS; Mariam Bekkali, DMD; Berna Saglik, DDS, MS; Junying Li, DDS, MS, PhD)
• 43. Effect of specimen dimension on flexural strength of 3D printed materials (Setthawut Choochaisaengrat, DDS; Minglei Zhao, PhD; Yuwei Fan, PhD; Russell Giordano, DMD, DMSc)
• 44. Unilateral zygomatic implant-supported oral rehabilitation: two clinical cases report. (Alvaro Gracia, DDS, DMD, FICD.)
• 45. Digital Impressions for Implant Fixed Complete Dentures: A Case Report (Mariam Issa, BDS; Himanshi Aggarwal, BDS, MDS; Daniel A. Givan, DMD, PhD)
• 46. Removal of lithium disilicate veneers using an Er:YAG laser (Chang Jung, DMD; Joseph Retrum, DDS; Kyung Kim, DMD, MS; Jennifer Sabol DDS, MS; Adam Lincicum, DMD, MS.)
• 47. Biocompatibility of human gingival epithelial cells grown on lithium disilicate in vitro (Nathaniel Hoang, DDS; Henry Chuang, PhD; Douglas P. Dickinson, PhD; Walter G. Dimalanta, DDS, MS; Jennifer V. Sabol, DDS, MS; James C. McPherson, PhD)
• 48. Management of Anterior Wear: Minimally Invasive Approach Using a Modified Dahl Concept (Jekita Kaenploy, DDS; Hyeongil Kim, DDS MS; Jennifer Kuracina, DDS)
• 49. Quality of communication between dentists and technicians regarding CAD-CAM all-ceramic prosthesis (Roojul Trivedi; Dr. Ramtin Sadid-Zadeh DDS, MS; Dr. Chin Chun Peng DDS, MS; Dr. Rui Li, DDS, PhD.)
• 50. Use of polyvinylsiloxane to maintain peri-implant mucosa contours (Alexis Pawlak, DMD; Andrew XE Lim, BDS; Winston W Chee, DDS, FACP; Cheryl J Park, DDS, FACP)
• 51. Mandibular reconstruction with the fibula graft and CAD/CAM implant-supported bar overdenture (Weiqing Liu, DDS, PhD; Wei-Shao Lin, DDS, PhD, MBA)
• 52. A mixed methods study of dental implant treatment outcome and impact on patients with oligodontia (Cui Cui, DDS, MSc, PhD; Robert P. Carmichael, BSc, DMD, MSc, FRCDC)
• 53. Influence of Scanbody design on digital impression accuracy in full-arch implant cases using 4 different intraoral scanners: an in vitro study. (Priscila Ceolin Meneghetti, Juniying Li, Gustavo Mendonça, Luiz Henrique Burnett Jr.)
• 54. Digital Centric Relation and Facebow Records with Intraoral Scanner and CAD Software (Won H. Yu)
• 55. "Smart Denture Conversion" technique for full arch fixed immediate load fabrication. (John Bender, DMD, MS)
• 56. Establishing lab communication for CAD CAM fabrication of PMMA hybrid prototype and permanent full arch zirconia hybrid restoration (Marla Teresa Rosas Diaz, Tarek El-Kerdani, Tommv Zhu)
• 57. Utilizing Cross-Polarized Dental Photography with Digital Shade Matching to Enhance Esthetic Outcomes (Philip Mui, DDS, Amelia Orta, DDS, FACP, Katherine Lin, DDS Radi Masri, DDS, MS, PhD)
• 58. Color Stability of CAD/CAM hybrid Ceramic Restorations: in-Vitro Study (T Nagai, DDS, MSc1; CC Yang, DDS, MSD, FACP2; D Morton, BDS, MS3 ; WS Lin, DDS, FACP, PhD4)
• 59. Immediate implant placement and loading in a terminal dentition: A clinical report (Abdullah Alehaideb, DMD; Dean Morton, BDS, MS; Waldemar D Polido, DDS, MS, PhD; Wei-Shao Lin, DDS, PhD, MBA)
• 60. Effect of pattern materials and fabrication techniques on the color of a pressed lithium disilicate ceramic (Niveen Hazem Zakaria, BDS, MS; Ihab A. Hammad, BDS, MS, DSc; Yasser M. Aly, BDS, MS,PhD )